Energy savings tip from NPPD
Columbus, Neb. – With temperatures beginning to cool, it’s a good time to make sure your attic isn’t going to be costing you money.
Nebraska Public Power District EnergyWise Program Manager Cory Fuehrer says there are a few things to check in the attic, starting with places that could be leaking warm air. Fuehrer noted that “Light fixtures and can lights, especially those manufactured before 2004, have plenty of holes and gaps to allow for air to escape from the living space into the attic. If these are installed wrong, you could be paying to heat your attic”
Can lights should have a cover, that separates the fixture from insulation in the attic, and spray foam insulation should be applied to seal air leakages. These leakages can also occur around ductwork that drops in from above the ceiling.
“During the summer, cool air passing through uninsulated ducts in warm attics can cause condensation on ductwork, and dripping will occur,” says Fuehrer. “This can lead to mold growth and safety issues. Uninsulated ducts are also at risk of becoming rusted and leaking conditioned air.”
Properly insulating your attic is also a major key to energy efficiency throughout the year. The Department of Energy recommends homes in Nebraska have a R38 insulation value or better.
“Without realizing it, you could be losing more than 30 percent of the heat in your home through your ceiling. If you don’t have at least one foot of batts, blankets, or blow-in loose-fill insulation, you probably have an energy efficiency improvement opportunity,” discussed Fuehrer, “these types of insulation often have an R-value of 2.8 to 4 per inch of material.”
Fuehrer says homeowners who heat their home with electricity should check with their energy supplier to see if they have any incentive programs available to help resolve these issues.
You can find information on NPPD’s EnergyWise incentive program by following this link: https://www.nppd.com/assets/2012incentives/insulation/2012brochure.pdf